Paving Stone Manufacturing Technology

A High Profit Business With Lowest Investment. Franchise Without the Royalty

           Get Introduced to a Complete System of  Stone (http://g603.net) manufacturing Technology

       Create Paving Stone (http://g603.net) s, Sidewalk Stone (http://g603.net) s, concrete parquet, floor Tiles (http://www.g682.net) , sidewalk Tiles (http://www.g682.net) to build roads, parks, floors

            This Technology is for investors, architects, designers, construction companies

This new unique technology gives possibilities for the production of Stone (http://g603.net) products; paving Stone (http://g603.net) s, sidewalk Stone (http://g603.net) s, concrete Stone (http://g603.net) s  with high physicomechanical indexes. The Stone (http://g603.net) surface of casting is characterized by high gloss and (http://maplered.com) perfect density. It is worthwhile to note that by imitating, the surface of any artificial or natural Material (http://g654.org) , from the plastic to the complex pattern of malachite, independent of overall sizes and (http://maplered.com) area, it is possible to obtain any color range with different complexity. Manufacturing paving Stone (http://g603.net) s, sidewalk Stone (http://g603.net) s, concrete Stone (http://g603.net) s, concrete parquet with this technology is more productive.

All these are possible due to specially developed technology. The essence of this technology is reduced to the fact that air from the concrete mixture, prepared on the special formula, begins to be moved away in the specially modified concrete-mixer and (http://maplered.com) the prepared batch falls on vibration table in an already solid state biased to the high density, free from the air lacunas. The use of a special high-frequency vibration table is necessary only for the uniform distribution of batch over the shaping surface of Stone (http://g603.net) s and (http://maplered.com) for even packing of the obtained casting.

In the production topographical- architectural building Material (http://g654.org) s, paving Stone (http://g603.net) s, sidewalk Stone (http://g603.net) s, concrete Stone (http://g603.net) s, flooring , we  use new effective flow charts of obtaining specific concretes with the broad band (http://maplered.com) of operating characteristics due to the variation over wide limits of the form of raw Material (http://g654.org) (binding and (http://maplered.com) of fillers), varieties, method and (http://maplered.com) stages of introduction of the chemical modifiers and (http://maplered.com) active mineral additives; Optimization of the composition of multicomponent concrete and (http://maplered.com) goal-directed control of technology.

Due to the Innovative policy of company, the proposed production has the high physicomechanical characteristics, which combine the high indexes of the strength properties (compressive strength from 40 and (http://maplered.com) above 90, that it corresponds to stamps on the strength OF M'00-MY200 and (http://maplered.com) more) and (http://maplered.com) the rates of hardening (strength at the age of the twenty-four hours of natural hardening is not less than 25-30 MPa) within the required indexes of construction, technical properties, including:

• Waterproof W15 and (http://maplered.com) above.
• Frost resistance F350 and (http://maplered.com) above
• Wear and (http://maplered.com) tear is not more than 0,2-0,3 g/cm2.
• Water absorption of 4.4 mass %.
• High resistibility to the penetration of chlorides.
• High impermeability to gas.
• Adjustable index of deformation (including compensation for the shrinkage of concrete at the age 14-28 days of natural hardening).

What are the advantages of our moulds?

• Longer durability The plastic used for the production of moulds can withstand (http://maplered.com) ing more than 300 molding cycles.
• they do not need planking
• they do not need steaming
• they do not require vibration table
• they do not need painting
• they have both lusterless and (http://maplered.com) glossy surface
• thickness of plastic 1.6 mm to 3 mm, can easily restore itself from distortion
• Suitable for all technologies of molding,

It occupies very little storing space.

What is needed to start the paving Stone (http://g603.net) manufacturing technology?

Training to operate the system

Purchasing the machine to manufactre the paving Stone (http://g603.net) s, sidewalk Stone (http://g603.net) s, concrete Stone (http://g603.net) s.

ï¿?nbsp;                    How much investment is required for starting production on your technology?

ï¿?nbsp;                    We have special programs for starting profitable production with minimum investments. For only Usd 6000 you will be able to  begin production.

ï¿?nbsp;                    Does it require some special raw Material (http://g654.org) , for the production of articles based on this technology?

ï¿?nbsp;                    You do not need any special or hard to find Material (http://g654.org) s to start production based on our technology, all required products are easily available and (http://maplered.com) are based on inexpensive Material (http://g654.org) s found locally.

ï¿?nbsp;                    How will the process of technology purchase take place?

Our policy is such that we do not sell Granilit products but transfer the technology to people who want to produce these products Potential buyers would need to attend a 3 day training. During this  3 day training seminar we teach how to produce Granilit products, reveal the formula and (http://maplered.com) coloring recipes to people or companies who wish to produce these products themselves. We charge a one time fee of $ 5000 for the above items and (http://maplered.com) supply all technical support to enable seminar participants to start their manufacturing process.The Equipment needed for production consists of 160 liter modified cement mixer and (http://maplered.com) a vibration table. Raw Material (http://g654.org) requirements are also commonly available anywhere in the world. They consist of portland (http://maplered.com) cement, Stone (http://g603.net) dust, pigments and (http://maplered.com) plasticizer additive. In fact what makes the final product  exceptional is not the equipment or the raw Material (http://g654.org) s but the production method.  Material wise the cost of manufactured finished product is as low as $  0.35  per square feet in Turkey. Depending the cost of finished prouduct in your region it may  still present a very high profit potential. A business plan we have developed  should help you in estimating  costs and (http://maplered.com) rate of return based on figures you plug into the worksheet. Our policy is to train you and (http://maplered.com) your personnel here in Istanbul for 3 days , give you everything you need to start production. This is a one time sale and (http://maplered.com) there is no ongoing franchise fee. After the training , you will be able to manufacture paving Stone (http://g603.net) s of various kinds. We have group trainings and (http://maplered.com) private trainings. If you wish to attend aprivate training, let us know and (http://maplered.com) we will set a mutually agreable date.

ï¿?nbsp;